The boards produced by HT Boards incorporate different technologies.
Raised 3D top deck board design
CAD software allows to produce a Raised 3D top deck, aligning all the composite layers to give excellent results whilst being pressed under great pressured to allow perfect results each time.
Strong CoreCell foam core
Lightweight CoreCell foam allows the board to be extremely light and buoyant. The CoreCell foam is strategically placed in the centre, thus allowing maximum strength and rigidity.
Flex Zones
With the use of different computer software and rider input, the Raised 3D top deck utilises various thicknesses in different sections of the board. This produces devoted areas of flex where it is needed - on the tips and the centre, which allows great absorption of big hits from waves and landings. These areas also give the rider great pop.
Complete Concave
We use hydrodynamic software, which allows us to find the perfect point to have a concave. With the perfectly formed concave early planing is achieved along with great speed on-the-go, without losing any stability and control.
Vacuum Pressed
HT boards are pressed under great pressure to produce strength and durability. By using this method, the composite layers are aligned perfectly each time. When all the air is pulled out of the vacuum bag, the atmospheric pressure pushes on the layers compressing each one into position and making it into one composite layer.
Firstly, the vacuum removes any unwanted air in-between each layer. Secondly, the pressure compacts the layers to form a strengthened structure capable of withstanding the vigorous forces it is put under whilst being used. Lastly, the whole process makes sure the resin/fibre mix is proportional to what is needed.